電線電纜五金鋼材塑料塑膠拉壓力試驗機廠家直銷價格優惠

電腦控制伺服萬能材料試驗機

Computerized Servo Control Universal Testing Machine

※櫥柜氣桿撐壓力測試儀 櫥柜氣桿撐壓力檢測儀歐美奧蘭專業生產本系列機廣泛用于各類五金、金屬、橡膠料、鞋類、皮革、服裝、紡織、建材、絕緣體、電線、電纜、端子等各類材料。測試其拉伸、撕裂、剝離、抗壓、彎曲、抗剪切、三點抗折、四點抗折等各類物理性測試。

※The machine can performs elongation, tear strength, peeling force, resistance, bending force, shearing, Constant load,Constant stroke, three-point bending, four-point bending of metal,non-metal,and compound material. It is used to analyze and test materials in following industries: hardware, metal, plastic, rubber, footwear,leather, garment, textile, building material ,nonconductor, wire&cable, terminal and so on.

※WINDOWS系統，可無限量擴充測試條件參數或測試結果報告參數。

※實時顯示測試曲線，并對測得的數據進行存儲分析，打印報告曲線。

※具有靈活多變的界面及控制方式，可以繪制多種特殊曲線。

※使用者可自行設定實驗之報告格式及報告內容，信號讀取速度500次/秒。

※高質感高強度鋁合金擠制成型螺桿罩，輕巧流線，明亮大方，華貴無比。

※高工藝加工線條機箱，利落的機件，表面噴砂電鍍或冷色烤漆等高級處理，凝聚出高雅，精致價值感。

※標準化夾具連接套，規格標準化，更換各式夾具方便快捷。

※高性能伺服馬達和專用變速箱具抗熱、低音、防震之效果，及高速高頻率的定位功能，搭配時規皮帶，提供高精度，低噪音的轉動組合保證十萬次無漂移，具有多種保護方式，可使試驗運行安全可靠。

※操作簡單飛梭調速，在荷重范圍內，可快速操控，實現多種夾具位移定速。

※高穩定度無間隙、無磨損滾珠螺桿，可消除噪音及機臺共振：配合時規皮帶輪，確保橫桿位移水平度及試件受力均勻度。

※高精度采用高精度輪輻式傳感器,重復性誤差（再采性）0.01%，溫度自動補償-10℃～+40℃，安全系數120%， 超載150%。

※自動化荷重自動歸零、換擋及校正，破斷點自動檢出，橫擋自動回位，曲線自動顯示，橫擋位移自動測量。

高智能圖形操控界面，功能完整，500次/秒數據采樣頻率，自動記憶，分析測試過程中之資料，對檢測能做記憶與結論。

※The testing software of Windows operating system has luxury interface.Some Mechanical values can be set,including speed, displacement,load and loading rate, stress and rate of stressing, strain and rate of straining, stressing rate→straining rate.Many kinds of phase transformation control menu can be combined freely into infinite variety of multistage control mode,such as displacement ≥&≤，load ≥&≤, yield point,break point ratio, stress≥&≤, strain≥&≤，circulation and nested loop control, etc. It can also unlimited expand testing parameters or testing results.

※Real-time display of testing curve,to save and analyze the measured data,? and then print reported curve.

※Standard clamp connecting sleeve with standard specification, which is convenient to? replace clamps.

※The tester is heat-proof,bass and shock resistant with high performance servo motor and special gearbox .It is also process of high speed and high frequency positioning.With timing belt, providing high accuracy and low-noise rotation portfolio guarantees 100,000 times without drift,which can make the? operation safe and reliable with various ways of protection.

※High-precision spoke sensor, repeatability error (readopted) 0.01%, automatic temperature compensation - 10℃～+ 40℃, the safety coefficient is 120%, and 150% ultimate overload.

依據標準：

本試驗機根據《電子式萬能試驗機》GB/T 16491-2008標準制造。

本試驗機根據GB/T12160-2002《單軸試驗用引伸計的規定》和GB/T16825-2008《拉力試驗機的檢驗》進行檢定和驗收。

This machine was manufactured according to the? GB/T 16491-2008 Standard.

This machine was checked and accepted according to the GB/T12160-2002 and GB/T16825-2008? Standard.

?

電腦控制伺服萬能材料試驗機100-2000kg量程

詳細技術參數：

電腦控制伺服萬能材料試驗機3T 5T量程

詳細技術參數：

?

默契合作從好的溝通開始