喬達環保供應DMF-Z-62S電磁脈沖閥 電磁閥兩寸半直角脈沖閥 噴吹電磁閥 一只起訂大量庫存

? ? ?電磁脈沖閥簡介：該閥系國外引進（亦稱隔閡閥）是脈沖袋式除塵器清灰噴吹系統的緊縮空氣“開關”受脈沖噴吹節制儀輸出旌旗燈號的節制，該除塵配件對濾袋逐排（室）噴吹清灰，使除塵器的阻力堅持在設定的局限之內，以包管除塵器的處置才能和收塵效率。
　　電磁脈沖閥技能目標：任務壓力：0.4～0.7,情況溫度：-10～55(℃),運用介質：潔凈空氣，膜片壽命：噴吹100萬次以上。
　　銜接螺紋：ZG2"，長度：210mm，寬度：190mm，高度：200mm，分量：2.8kg
　　裝置辦法：電磁脈沖閥輸入端(IN)，與儲氣筒金屬管相銜接，其輸出端與除塵箱噴吹管銜接，銜接螺紋間均填以 生料帶緊固密封。

　　DMF-40直角電磁脈沖閥具有以下優點；

　　1．流體阻力小，密封面受介質的沖刷和侵蝕小。

　　2．開閉較省力。

　　3．介質流向不受限制，不擾流、不降低壓力。

　　4．形體簡單，結構長度短，制造工藝性好，適用范圍廣。

　　技術指標：工作壓力：0.4～0.7, 環境溫度：-10～55(℃), 使用介質：清潔空氣，膜片壽命：噴吹100萬次以上。

　　連接螺紋：ZG11/2"，長度：140mm，寬度：125mm，高度：170mm，重量：1.6kg

　　安裝方法：電磁脈沖閥輸入端(IN)，與儲氣筒金屬管相連接，其輸出端與除塵箱噴吹管連接，連接螺紋間均填以 生料帶緊固密封。

　　該DMF-40電磁脈沖閥系國外引進（亦稱隔膜閥）是脈沖袋式除塵器清灰噴吹系統的壓縮空氣“開關”受脈沖噴吹控制儀輸出信號的控制，該除塵配件對濾袋逐排（室）噴吹清灰，使除塵器的阻力保持在設定的范圍之內，以保證除塵器的處理能力和收塵效率。

?

?

DMF-40 right angle electromagnetic pulse valve has the following advantages;

1. The fluid resistance is small, and the sealing surface is less washed and eroded by the medium.

2. Opening and closing is more labor-saving.

3. The flow direction of the medium is not limited, and it does not disturb the flow and does not reduce the pressure.

4. The utility model has the advantages of simple shape, short structure length, good manufacturing process and wide application range.

Technical indicators: Working pressure: 0.4 ~ 0.7, Ambient temperature: -10 ~ 55 (°C), Use medium: clean air, diaphragm life: more than 1 million blows.

Connecting thread: ZG11/2", length: 140mm, width: 125mm, height: 170mm, weight: 1.6kg

Installation method: the electromagnetic pulse valve input end (IN) is connected with the metal tube of the gas storage cylinder, and the output end is connected with the dust blowing box blowing pipe, and the connecting thread is filled with the tetrafluoroethylene raw material tape to be tightly sealed.

The DMF-40 electromagnetic pulse valve is imported from abroad (also known as diaphragm valve). The compressed air "switch" of the pulse bag type dust collector cleaning system is controlled by the output signal of the pulse blowing controller. The dust removal accessory is for the filter bag. The ash is sprayed row by row (room) to keep the resistance of the dust collector within the set range to ensure the treatment capacity and dust collection efficiency of the dust collector.